D & L Mobile Locksmith

Keypad locks are considered to be more practical and convenient. With them, you do not have to use keys to unlock your door. Another great benefit of a smart or electronic lock is that it allows you to change the access code if necessary. But how do you change lock codes properly in case you forgot your code or too many people know your code already?

In this article, we’ll guide you on changing the code on electronic or keypad door locks and adding and deleting individual user codes.

When Should You Change The Code On The Keypad Door Lock?

A keyless door lock is handy because you don’t have to worry about losing or misplacing a key or getting locked out of your house. Digital door locks can’t be copied, unlike conventional locks, because there are no physical keys.

The sole reason you must change the keypad code on your residence is for security purposes. If you have just moved into a new home or apartment, it is imperative to change the code so that the last tenants won’t have any more access to the premises. You must also change the code if you think someone has obtained your code and you would like to maintain the security of your home.

The steps for resetting the code on a keypad door lock will differ between brands and models. Schlage, Weiser, and Yale are some commonly installed keypad door locks that enable users to generate and change access codes using the keypad or a smartphone.

Steps To Change Master Code On Digital Door Lock

For Schlage Door Lock

The system of changing a six-digit programming code into a keypad is easy and needs a few steps only.

Step 1

Input the master code for the lock. Suppose you don’t know the master code, check the back of the faceplate or the yellow label on your user guide to get the default programming code. Most electronic locks have a default 4- to 6-digit access code that must be changed after installing them.

Enter your code if the default code has already been changed.

The button with the Schlage logo will blink three times, and you’ll hear three beeps.

Step 2

Press the Schlage button again, then press the number 1 on the keypad simultaneously to add/change a new entry code. The Schlage button again will blink orange three times and beep three times.

Step 3

Enter a four-digit user code. Once the command is received, the Schlage button will again beep and blink.

Step 4

For the final step, verify your new code by inputting the same four-digit code once more. The Schlage button will turn green, displaying one long flash and one long beep to imply successful reprogramming.

For Weiser Digital Lock

This guide is applicable to the Premis model of digital door locks.

Step 1

First step is to open the door and lift off the lock’s interior cover. Press the program button once, and you’ll hear your lock beep five times. After, it will allow the checkmark button to beep and flash five times.

Step 2

Press the checkmark and enter the master code. Then press the lock button once.

Step 3

Enter the code you want to remove and press the lock button.

Step 4

Enter the old code you wish to delete. After removing the password, you should input your new code and confirm it.

Step 5

For the last time, press the lock button and wait for the programming to complete.

Your programming is successful if you hear a beep, and the keypad will flash green once. If the programming fails to change the code on the keypad lock, the keypad will blink and beep three times in a pattern.

For Yale Keypad Door Lock

Yale smart lock has a straightforward code-changing approach, though changing the access code varies per model.

Step 1

Activate it by touching the keypad with your palm. Enter your master code (usually, it’s four to eight digits), followed by the # key. If the master code hasn’t been set, it will be programmed to 123456 automatically.

Step 2

Press 2 to register the new code, and press the # key. Select the ‘1’ button followed by the ‘#’ key. Next, choose a user code slot from 1 to 20, then enter the new code. To complete the process, press the # button.

Tips To Change Code On Your Keypad Door Lock

  1. Use a unique code
  2. Never use patterns (e.g., phone numbers, birthdays, or anniversaries)
  3. Change your code at least every six months
  4. Follow the manufacturer’s instructions
  5. Always test your new door lock code
  6. Check your old code if it’s no longer working

Contact a residential locksmith


Changing the code on a keypad door lock regularly is vital to keep your home secure. And if you follow the above steps, changing the code on your door lock will be an easy task. However, it is always better to request the service of professionals.

When you call the residential locksmith service of D&L Locksmith, our team will verify your current locking conditions and offer you the best solution. Call us today at 519-686-2870 to learn more about the residential locksmith services we offer!


Send the url of this page to a friend of yours